FROM IMAGE OWL AND LINAX TECHNOLOGIES

The Linac Digital Twin

From Machine QA to Clinical Consequence.

Your QA reports a clean pass—every parameter strictly within tolerance. Yet it remains silent on the critical question: what dose will today’s physical machine actually deliver to your patient?

Image Owl and Linax Technologies are integrating TotalQA® with a physics-based digital twin of the linac. By harnessing the QA data you already collect, we transform routine pass/fail checks into actionable, real-time dosimetric insight.


THE PROBLEM

Two Frameworks. One Missing Question.

For three decades, TG-40/142 and TG-100 have anchored radiotherapy QA. Together, they tackle critical foundational questions—yet neither was built for the moment your team faces when a result strays out of line.

TG-40 / TG-142

“Is this parameter within tolerance?”

A parameter-by-parameter snapshot against a fixed baseline.

TG-100

“How likely and severe is this failure mode?”

A prospective risk judgement, made before any measurement is taken.

UNANSWERED UNTIL NOW

“What dose will today’s machine deliver to this patient’s plan?”

Answering it takes a model of the machine itself, not another test against a fixed number.

THE CONCEPT

A Virtual Linac That Keeps Up With the Real One.

The Linac Digital Twin is a physics-based model of your accelerator, subsystem by subsystem. It's kept current from routine QA measurements and turns them into what they mean for dose.

PHYSICAL MODEL

Built from physics, not curve-fits.

First-principles models of the HV supply, RF chain, target, flattening filter, jaws and MLC, gantry and dose calculation. It stays valid at field sizes never measured.

+

QA Data • TotalQA

Fed by data you already collect.

Output, flatness, symmetry, energy, MLC and isocenter results refit the model. No new Monte Carlo runs, no water-tank recommissioning.

+

DOSE CALCULATION

Answers in dose, not pass/fail.

Any set of measurements becomes one clinically interpretable number for a specific plan. It runs independently of your commissioned TPS model.

WHERE TOTALQA FITS

A Twin Is Only as Current as Its Data.

Designed for complete scalability and security, TotalQA expands effortlessly with a single click to adapt to your evolving requirements—whether you’re adding new locations, onboarding staff, or integrating new equipment.

With a built-in return path, the digital twin recommends targeted follow-up testing directly within your TotalQA schedule. This dynamic, closed-loop capability elevates it from a static digital model to a true interactive twin.

WHAT MAKES IT POSSIBLE

Get More from the QA You Already Do.

Cumulative dose impact

One number for the dose difference between your plan and what today’s machine would deliver. It rises before any single tolerance is crossed.

Virtual water tank

Full beam characterization, small fields included, reconstructed from routine profiles and depth doses. No extra beam time.

Continuous commissioning

The beam model follows the machine’s current state, not its state at installation. Revalidate after service in minutes.

Machine-aware plan verification

Recalculate a plan on today’s machine state and compare dose to dose, in clinical units, beyond the gamma pass/fail.

Root cause intelligence

Model parameters are real components, so a field-size error can be traced to beam steering rather than jaw calibration.

Institutional memory

A quantitative history of how this machine has behaved, drifted and been repaired, so knowledge doesn’t leave when people do.

“A future state in which quality assurance depends less on the accumulated expertise of any individual physicist, and more on evidence the model already computes and continuously updates.”

From Toward Digital Twin-Enabled Management of Medical Linear Accelerators: Marco Carlone, Linax Technologies, and Matt Whitaker, Image Owl

THE WHITE PAPER

Read the Full Paper.

INSIDE

What TG-142 and TG-100 leave unanswered

How the twin is built and updated from routine QA

Cumulative dose impact as a new QA metric

Patient-specific QA beyond the gamma pass rate

Life-cycle management and workforce training

The open governance questions

Get the white paper

Tell us where to send it. We’ll also let you know when pilot results are published.

THE PARTNERSHIP

Two Companies.
One Closed Loop.

Image Owl brings TotalQA, the cloud-based, vendor-neutral QA platform that collects and organizes machine QA across your fleet.

Linax Technologies brings SIMAC™, its physics-based linac simulator and beam model.

Together, routine QA becomes a continuously updated picture of the machine.

WHERE THIS STANDS

Working Today

TotalQA collects, analyzes and trends machine QA in clinics now.

In Pilot

Feeding TotalQA data into SIMAC and getting subsystem-level explanations back.

Open Questions

Model versioning, audit trails, and the regulatory line between an independent QA model and a licensed TPS. The paper addresses these openly.

See What Your QA Data Can Tell You.

Talk to us about TotalQA today and joining the Linac Digital Twin pilot.